DLT
- The DLT is very fast. When dumping large files from the 10-51 it maintained
approximately 700kb/sec ( or 2.5 GB/hour) at 6GB density setting.
At 10GB density setting, it actually ran slower; apparently the
workstation could not provide data fast enough to keep the DLT
in streaming mode.
When dumping a partition of smaller files, such as /usr, the speed
of the disk always determined dump speed - approx. 400kb/sec on
the IPX at any DLT recording density .
- It runs as an "st" device but you need to add a few lines to the stdef.h
and st_conf.c kernel files. Tape movement commands such as
mt -f /dev/rst9 eom are executed correctly and the "s" option in
restore finds the correct dump file on tape.
- The DLT we used has 4 density/capacity settings:
2.6 GB, 6.0 GB, 10.0 GB, 10.0 GB-with-compression. All are selected
manually from front panel with indicator light to show which is
being used.
- Didn't have time to see how many Gbytes the tape would hold at
maximum density..
DVD Business cards
- By Imastercopy
- In Duplication Services